Gambol Shroud - RWBY
Gambol Shroud - RWBY
3D
Published 2016-04-25T16:28:43+00:00
1:1 scale replica of Blake Belladonna's "Gambol Shroud" from the Rooster Teeth animated series "RWBY".
The prop is designed to be fitted with a 3-3.5mm rod extending through the gun, into the upper section of the blade, and with a 2nd rod in the Sheath, holes for which are built into the model.
My example was printed at:
0.2mm Layer height
10% Infill
Some parts (Blade Root, Sheath 1) needed supports. The gun halves I printed with support for the rod tunnel, but it may print ok without too
My printing required a total of 161m of filament (64m for the weapon, 97 for the sheath), and a total time of 49 hours.
The finished prop is roughly 2ft 2 inches long
Credit as @MarkStanton89 on Instagram/Twitter
| 发表的日期 | 25/04/2016 |
| 打印工艺 | FDM |
Printed for my friend cosplaying as Blake Belladonna at Japan Expo 2019 ( France ). Used once, the paint is already worn out.