Garden bench/swing coffee (or beer) table
Garden bench/swing coffee (or beer) table
3D
Published 2017-05-16T10:42:46+00:00
This is a small bench (or swing bench in this case) table for tee/coffee or beer bottle/can. It's design to be printable on standard 20x20cm print bed without supports.
It can be fixed at desired angle relative to bench pole.
Table has size of 18x12cm and is build from three components. Table itself, frame around and clamp.
Clamp is design for poles of approximately 50mm diameter. If yours are smaller - you can use some rubbers shims (or ask for another dimension :) ).
I've designed two tables - one plain, and one with hole for beer bottle - so you wont flip your precious drink and spoil it :) Please choose version wisely ;)
You will require also m5 nut and a screw - to fasten the clamp.
| 发表的日期 | 16/05/2017 |
| 尺寸大小 | 180mm x 120mm x 50mm |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |