Gerzer III tankoped
$3.00 Gerzer III tankoped
3D
Published 2017-04-21T10:02:53+00:00
Assembly video:
ASSEMBLY INSTRUCTIONS: . Insert balls into sockets with side to side rocking action - pliers recommended. Some sanding might be required depending on your printer. My print in the pictures was printed at 0.2mm layer height.
Panzerkampfgeher Gerzer III (Pz.Kpgh. Gerzer III) Tankoped - a mech and tank combined - designed to engage enemy armored vehicles. Details include: commanders cupola, gunner's periscope, rangefinders, driver's view port, main cannon, radio antenna, towing rings, escape hatches, exhaust and cooling vents Double knee joints so it can hull down, gun swivels, turret rotates 360, ball joint articulation.
Gerzer3 LEG_armor_front.STL -print 4x 20%infill
Gerzer3 LEG_armor_back.STL -print 4x 20%infill
Gerzer3 LEG_3.STL -print 2x 20%infill
Gerzer3 LEG_2.STL -print 2x 20%infill
Gerzer3 HULL.STL -print 1x 20%infill
Gerzer3 TURRET_socket.STL -print 1x 20%infill
Gerzer3 TURRET_gun.STL -print 1x 20%infill
Gerzer3 TURRET_ball.STL -print 1x 40%infill
Gerzer3 TURRET.STL -print 1x 20%infill
Gerzer3 SKIRT_right.STL -print 2x 20%infill, supports needed
Gerzer3 SKIRT_left.STL -print 2x 20%infill, supports needed
Gerzer3 SKIRT_holder_right.STL -print 1x 40%infill
Gerzer3 SKIRT_holder_left.STL -print 1x 40%infill
Gerzer3 LEG_knee.STL -print 1x 20%infill
Gerzer3 LEG_foot.STL -print 2x 40%infill
| 发表的日期 | 21/04/2017 |
| Price | $3.00 |
| 尺寸大小 | 60mm x 60mm x 80mm |
| 打印工艺 | FDM |
| 复杂程度 | 中级 |