Ghuling
$10.00 Ghuling
3D
Published 2021-03-31T12:44:03+00:00
SPAWNS OF THE GREAT ROT
Chapter: Ghuls
Subject: Ghulings
Description
Ghulings come from the bodies of the Vastari Race, specifically from the Phrallixin, the slave bloodline. After succumbing to the Soul Rot, the soul left the body and became a Geist, while the body raised again as a Ghul. Like the Geistlings, these weakest bodies have been labeled Ghulings by the Vastari. But be careful, these Ghulings aren't to be messed with, a single one may be easy to slay, but they usually run around in vast numbers, and with their newfound, long, sharp claws and teeth they are truly a terrifying force to deal with.
Details
Ghulings come on a customized 25mm base.
Due to some scaling issues on my part, you will receive 2 scaled versions:
- 32mm scaled versions
- 40mm scaled versions
3D Elements Printing guide
- Models validated and supported for 50um LH (0,05mm)
- If you cannot print them on mono printers I suggest to increase cure time (even with fast resins even to 2.6s)
- I suggest 5 burn in layers (you can also add 2 transition layers)
- Raft is thin to prevent raft separation and resin wasting + FEP degradating
- If you struggle with removing supports please use warm water to make them soft then remove it
- Cure your model after removing supports and be gentle since some of the parts are thin.
General info of codes:
Presupported = heavy presupports
L-Presupported = Lighter version of supports
LL-Presupported = they are most lightly supported, working good with well calibrated printers, also leaving minimum ammount of scars on the model.
Hollowed versions only in LYS files.
Please consider to use them instead STL, they create less suction forces that means it minimise chance for failed print!
Cheers.
Happy Printing,
- Daniel Krasuski
| 发表的日期 | 31/03/2021 |
| Price | $10.00 |
