Giant fidget spinner, 6020 bearing and M27 + M10 nuts
Giant fidget spinner, 6020 bearing and M27 + M10 nuts
3D
Published 2017-06-05T15:18:03+00:00
This object was made in Tinkercad. https://www.tinkercad.com/things/lTjZvM3UqYo
Hello all,
This is my first big creation that I share here, I made them in Fusion 360 and Tinkercad
This is my biggest fidget spinner design. I make this to fit to the maximum size of my 3D printer. (200*200*230 printer)
I used a 6020 bearing, 4 M27 nuts and 8 M10 (2 per hole).
It's printed in ABS and acetone vapor smoothed, all fit tight and put in place with hammer
The entire thing weights 2kg, that's for why I make a handle to grab them easily (the handle is not centered because like this it's easier to put hand inside)
I hope you like them!
You have two solutions for print them :
1- Print them assembled like in the Tinkercad STL, and use support, all objects have 0.2 space
2- My prefered solution : Print all 3 parts one by one, like this you don't need any supports
I printed them in ABS with 40% infill, after that I used an acetone vapor bath for smooth all
| 发表的日期 | 05/06/2017 |
| 让时间去下载 | 500 - 700 分钟 |
| 尺寸大小 | 200x200x24 |
| 打印工艺 | FDM |
| 复杂程度 | 中级 |