Gimbal for 21.5 mm OD plastic conduit
Gimbal for 21.5 mm OD plastic conduit
3D
Published 2017-05-30T10:08:49+00:00
A gimbal that can be used for joystick design or for creating your own steadicam rig. Designed for use with M3 round headed screws. (The main base attaches to your casing with round headed M5s that are countersunk into the body). The screw heads are friction seated into the body and the threads pass through the bearings. You can then print threaded attachments or glue whatever connectors on to the screws.
The GimbalConfigs.STL file shows how it can be mounted to the bottom of a joystick casing, or mounted to the top and pieces inverted to pass through itself. Have fun!
All 3 parts took about 7 hours to print on a Monoprice Mini running at a moderate speed
You may freely modify this file to suit your needs.
Designed in 123D Design.
Prints great at .021 mm layer height. I printed with 3 and 4 walls without issue, and 20-30% infill.
| 发表的日期 | 30/05/2017 |
| 尺寸大小 | 90mm x 70mm |
| 打印工艺 | FDM |
| 支持自定义 | YES |