Glow Tetrahedron
Glow Tetrahedron
3D
Published 2019-12-01T02:25:16+00:00 • Remixed from Foldable Tetrahedron - Print Flat
Really simple and cool model. Nice design by @DesignMakeTeach.
I added a small hole on the bottom where a switch can be placed. There are also some supports for the switch inside the object. Something like one of the switches here:
Adafruit Industries Breadboard-friendly SPDT Slide Switch
The inside measurement of the holder for the switch is 11.5mm X 5.85mm
There is a battery holder and cover that snaps in to keep wires tight so you don't need to solder anything to the battery. A CR2032 battery was used.
I very poorly soldered the wire ends to the switch and the LED, just good enough to work. Glued together afterwards.
Enjoy the lighted tetrahedron.
Printed with Inland transparent PETG.
The infill got kind of weird and gave it a nice frosty look.
Print in anything translucent/opaque or print with 1 or 2 outer walls and 5% infill.
| 发表的日期 | 01/12/2019 |
| 让时间去下载 | - 120 分钟 |
| 尺寸大小 | 80mmx80mmx80mm |
| 支持自定义 | YES |