Han Solo DL-44 inspired Hero Blaster
Han Solo DL-44 inspired Hero Blaster
3D
Published 2015-12-14T12:39:13+00:00
I have had alot of people ask me to share my files for my Han Solo Blaster build, so here they are. There are a few extra/optional file in the zip file. han solo adapter / han solo scope nut test / han solo sensor were all included for test fittings. han solo adapter is without the sensor included so you do not have to use as much material for a test fitting. han solo sensor was included incase you did not want to print out another adapter with the sensor already attached. han solo scope nut test is the same as the regular nut but is included so you can mark the length of the screw before you cut it. all parts can be screwed on or pressure fit, allowing the airsoft pistol to still function. or you can glue them together, and it should still function. Reference photos are marked with info on the airsoft pistol and scope, plus help with assembly. I have found some pretty good 3D models of Broomhandle Mausers, with a few tweeks to the scale of the barrel adapter and muzzle hider the rest of the parts should fit as is. upgraded flash hider https://www.myminifactory.com/object/51475
| 发表的日期 | 14/12/2015 |
| 打印工艺 | FDM |
| 复杂程度 | 中级 |
I had another airsoft Broomhandle Mauser and decided to make another Han Solo Gun, Only problem was that the new one was smaller than the 1st one I made, 83% of the originals size... I scaled the files in the printing program and everything worked well... I printed the Scope Mount and top pieces at .1mm with thick walls just to make sure there was enough strength.