Headphone Stand
Headphone Stand
3D
Published 2017-12-04T11:47:53+00:00
This is a pretty simple stand to hold my headphones.
It is designed to have the vertical and base componets fit snugly together. If it is loose, I'd suggest jamming in some paper in the joint. Does not move after that.
The eagle eyed will notice the abutment at the bottom. I scaled the model in cura and forgot to scale both equally. Rooky error I know, so I had to make an adapter. I have not included it as the size is prett specific to the error I made.
Cheers
I printed the vertical section with the depth dimension going vertical due to printer limits. It turned out pretty nicely, but would be better on its side if the infill is set correctly.
Used 15% infill, could have gotten away with 10% infill.
| 发表的日期 | 04/12/2017 |
| 让时间去下载 | - 3 分钟 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |