Hunter Knife - Destiny
Hunter Knife - Destiny
3D
Published 2017-10-12T09:49:04+00:00
Decided to share the original files I made and used to create my hunter knife from the Destiny games. These were modelled from scratch in Fusion based on the old reference turn around provided by Bungie to make the model as accurate as possible. I included both the left and right halves as a whole, and each side split into parts to make printing easier for smaller/average sized printers. The total length is around 17.5" from end to end, which s in fact game accurate (ie you can get your fingers in the holes on the grip and all that good stuff). You will need something to wrap the handle with. I used 80" of 1/8" wide elastic ribbon which can be found in spools on amazon for like, $8.
Pictured is a final painted resin cast, which will be available for purchase soon in my Etsy shop as kits and finished products. Please do not upload these files to other sites or sell them or anything, thanks.
Simply print out both halves, or all six of the smaller sections and glue them together, pretty straight forward. The seams for the smaller sections are purposefully staggered like bricks to make the final product stronger. Been a while since i printed this so I cant remember print time/material used so if anyone makes one and records those numbers I would love to know them so they can be added, thanks.
| 发表的日期 | 12/10/2017 |
| 尺寸大小 | 450 X 75 X 15 |
| 打印工艺 | FDM |
| 复杂程度 | 非常容易 |
| 支持自定义 | YES |
Printed Great 3dPrints Silver