Layer Height Reference Display
2,495
views
127
downloads
4
collections
0 comments
Loading comments...
Layer Height Reference Display
3D
Published 2019-06-09T10:20:20+00:00
17
0
Add to Collection
Description
A display reference for layer heights.
Detailed printing instructions are in the "Printing Details" section. It is a bit involved.
允许
Printing Details
Simplify3D Printing Setup
- Import model
- On the top menu go to "Mesh > Separate Connected Surfaces" to separate out the sample swatches from the base
- Add a new process for each swatch
- Add new process
- Click "Select Models" and select only the current swatch
- In "Layer" set the appropriate layer height
- Repeat for each swatch setting the infill pattern different for each. An easy way to do this is to just copy the first one you made and just update the infill and select the corresponding new swatch
PrusaSlicer Printing Setup
- Import model
- Set the slicer to expert mode
- From the top bar select "Split to Parts" (it is important to split to parts and not split to objects because the latter will have the slicer force the objects to the bed and I could not figure out how to get it to let me move them off the bed. If you know how let me know in a comment)
- Adjust the layer height settings for each swatch
- Right click the gear next to the swatch in the right hand object list
- Select "Layer and parimaters" to add those modifiers
- Remove alll but "Layer height" so that you can make sure you do not have anything overriding you do not mean to
- Set "Layer height" to the appropriate layer height for the swatch's position (0.05/0.10/0.15/0.20/0.30)
Color Print Info
If you want to do the color changes like I you add a color change at 1mm for the bottom of the text and one at 2mm for the start of the swatches.
Technical Information
发表的日期 | 09/06/2019 |
让时间去下载 | 100 - 110 分钟 |
材料数量 | 93 |
尺寸大小 | 110mm x 30mm x 7mm |
支持自定义 | YES |
More Information
Object Parts