Luv's Blaster (Blade Runner 2049)
Luv's Blaster (Blade Runner 2049)
Published 2020-05-04T16:19:38+00:00
I love Blade Runner and there's a huge community around the blasters; especially Deckard's and K's.
I wanted to challenge myself in recreating a prop from references alone.
Since there are already so many designs of Deckard's and K's out there I picked Luv's blaster which has almost no screen time.
Modeled in: Fusion 360 (Personal - Not For Commercial Use)
Scale assumptions
Caliber: .45 ACP
Barrel inner diameter: 11.4681mm (.4515in)
Screw-head in metal cover: 4.5mm diameter
Grip Lines (black): 6mm wide
Approximate Dimensions
233mm x 155mm x 34mm
This was my first time using Fusion 360 and modeling a complex object with parts that have to fit together.
Be warned: The parts are designed with 0 tolerances, so be prepared for a lot of sanding.
But: I've included the Fusion 360 file, so everyone is welcome to improve on the design, or modify it to make it more accurate to the original prop.
I have included a parts list document which also contains the colors I used to paint the final replica.
Some info about the print
Slicer: Cura
Printer: Creality Ender 3 Pro (stock)
Material: Sunlu PLA (gray) - 200 °C
Layer Height: 0.08mm (0.12mm first layer)
Paintjob: Vallejo acrylics + Airbrush
Also availabe on thingiverse: https://www.thingiverse.com/thing:4333810
Painted (but not weathered): https://imgur.com/a/Pjgb3B6
WIP: https://imgur.com/a/sMMWoGw
Comparison: source, model, render, painted: https://i.imgur.com/l4nPasM.gifv
Use 09-barrel-top-filesizelimit.stl for the top barrel. The 'original' 09-barrel-top.stl is bigger than 100MiB and can't be uploaded due to file size limitations on MyMiniFactory.
I assure you that all .stl files are still filled with unnecessary detail.
04-m3-smaller.stl, 07-m14-left-smaller.stl, 07-m14-right-smaller.stl can be used instead of the regular parts. These are tiny screw head thingies and are hard to sand, making the original files hard to put in place once the model is painted.
发表的日期 | 04/05/2020 |
尺寸大小 | 233mm x 155mm x 34mm |
Thanks Stefan for the build! One of my first blasters put together from 3d printed parts, I tried weathering the gun with some charcoal if you'd like to see the results - https://youtu.be/xNzK_RRuiRk