M4 Square Nut Adapter for 20x20 T-slot
M4 Square Nut Adapter for 20x20 T-slot
3D
Published 2019-04-09T15:55:17+00:00
Designed an addapter so my square M4 nuts don't spin in the T-slot while mounting to the frame of my printer.
The red one is the prototype in PLA and all the blue ones are PETG (both from Filaments.ca)
Products used:
https://filaments.ca/?rfsn=4740568.a03b49
Note: Affiliate link above - I earn a commission from qualifying purchases at no additional charge to you just by using the links listed which helps support the channel.
To find more of my work, please check out my website: http://wrightbuilt.ca/
To download any of my own 3D designs, check out my design library: https://www.myminifactory.com/users/WrightBuilt.ca
Support me by Subscribing/Liking my YouTube channel, or by tipping me via MyMiniFactory (PayPal) here: https://www.myminifactory.com/users/WrightBuilt.ca
You can find my disclaimer here: http://wrightbuilt.ca/disclaimer-page/
Printed in PETG on a PRUSA Mk2.5 with MMU2.0 single mode at 0.2mm NORMAL and Prusa PET defaults in Slic3rPE
| 发表的日期 | 09/04/2019 |
| 让时间去下载 | - 1 分钟 |
| 材料数量 | -0.5 grams |
| 尺寸大小 | 18mmx8.5mmx3.5mm |
| 支持自定义 | YES |
