Mastermind Travel Box
Mastermind Travel Box
Published 2017-11-20T11:22:08+00:00
Mastermind is a great game! I wanted to continue my learning of Fusion 360 and used this project to help. I am giving this to my nephew and niece as a Christmas gift.
How to play
Mastermind is a game of logical deduction, one player gives clues about his secret code that the other player makes guesses about until he discovers the secret. (You can see a game played out above -- black pegs indicate a guess has a color that is in the exact right spot, and white pegs indicate a guess has a color that is right, but in the wrong spot).
I used 0.15mm in my prints, but the resolution doesn't matter much. I print box.stl standing tall, the other models print with on their bottom (or in the case of peg.stl, on their top).
Easy to assemble!
The only post processing needed is to glue the top.stl to the box.stl. I used CA (super) glue, after lightly sanding both surfaces to ensure good contact.
When inserting the drawers into the box, you just push them in directly (no need to try to put them in one corner at a time). You may have a smidge easier time doing so before you do the gluing step above, but you should not find it impossible either way.
Also, I printed 16 of each color peg, 8 total colors -- two colors should be reserved for giving clues. Otherwise, you need to print more of those two colors if they can be included as part of the secret.
发表的日期 | 20/11/2017 |
支持自定义 | YES |