Medium Size Glue Bottle Stand
$1.70 Medium Size Glue Bottle Stand
3D
Published 2019-10-22T14:50:20+00:00
A Glue Bottle Stand to hold a medium size inverted bottle of glue or any other thick liquid or gel, to allow the glue/liquid to settle in the dispenser nozzle before use. This is especially useful with the “Gel” type glues.
The parts can be easily 3D printed, without any support, on a modern inexpensive 3D Printer. They can be printed with a variety of materials, including PLA, PETG, ABS and many other types of printable materials.
PLA works very well for this application. It is easy to print. The object should be durable, easy to maintain, and last for a long time.
However, it should not be stored or kept at high temperature, exceeding ~55 C (~ 130 F).
Should the object be left in a high temperature environment, such as a parked car in the summer, I strongly recommend using another heat tolerant material, such as PETG or ABS to prevent warping.
Recommended print settings with a .4 mm nozzle
- Layer Hight: .150 ~.160 mm, depending on motors and gearing
- 3 perimeters or shells (1.2 ~ 1.5 mm)
- 8 bottom layers (1.2 ~ 1.3 mm)
- 8 top layers (1.2 ~ 1.3 mm)
- Infill 15%~20%, depending on infill type
Instructions for use
Insert the capped glue bottle inverted in the opening on top of the stand. Let it rest for a few minutes to allow the liquid or gel to fully settle in the dispensing nozzle prior to use.
| 发表的日期 | 22/10/2019 |
| Price | $1.70 |
| 让时间去下载 | 300 - 450 分钟 |
| 材料数量 | 67 grams |
| 尺寸大小 | 80mm X 55mm X 65mm |
| 支持自定义 | YES |