Mesh Bottle Holder
Mesh Bottle Holder
3D
Published 2020-04-24T10:05:13+00:00
Designed this bottle holder for a friend, with a squashed hexagon mesh for lightweight strength that doesn't require support material to print.
As Athens isn't the most cycling friendly city in the world we don’t have bikes, so apologies for no bike mounted photos, maybe one of you guys can upload one!
It is designed to fit standard bike bottles up to 70mm in diameter. This should be the standard for most use cases but if you use a slightly bigger/smaller bottle you can scale it up/down a bit in your slicer (around 3% either way).
The mounting holes are standard for most bikes and use 2x M5 clearance holes spaced 63.5mm apart with some allowance in the tolerances for scaling the design as mentioned above (see slightly oversized oval holes in images).
We printed this design with Silver PLA [Real Filament].
To print this design we used an Ultimaker 2+ 3D printer and the print in the photos is printed with a 0.6 mm nozzle [you can also use 0.25mm, 0.4mm +0.8mm].
We would love to see your prints!
Follow us!
F: facebook.com/3dppa
I: @3dprintproject.athens
Resolution: 0.1mm - 0.3mm (0.3mm Shown)
Infill: 0% (saves weight + print time while still remaining strong)
Wall Thickness: 1.8mm
Brim: No
Raft: No
Speed: 60mm/s
Post processing: Not Required
| 发表的日期 | 24/04/2020 |
| 让时间去下载 | 5 - 分钟 |
| 材料数量 | 102g |
| 尺寸大小 | 199mm x 87mm 70mm |
| 支持自定义 | YES |
