Modular Surround Speaker
Modular Surround Speaker
3D
Published 2017-08-14T10:55:56+00:00
After having made the Modular Sound Bar / Center Speaker (https://www.myminifactory.com/object/41370) I continued my project of making a full set of speakers using my 3D printer. You could already use the modules of the Sound Bar as stereo and surround speakers, but for my situation I needed the speakers to have a little stand. Once I had done that and hooked everything up I found the high frequencies lacking a bit with the speakers I used so I added a tweeter. This is the result, again fully printable without supports. If you compare the sound bar with this unit you will find that I used different speakers - I have ran out of the units I got from China so I used some (more expensive) store bought (JayCar Australia) ones.
As with the sound bar, please let me know how you go if you end up making these.
I printed using PLA at 0.2mm and 6cm / second, no supports
| 发表的日期 | 14/08/2017 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |