Modular Wall Mounted Headphone Rack
Modular Wall Mounted Headphone Rack
3D
Published 2015-06-03T01:11:55+00:00
Modular Wall Mounted Headphone Rack
This headphone mount is capable of (using the 1.5 inch dowel/pipe diameter) getting many more attachements than any headphone stand in existence! It is designed to be robust in both plastic and aluminum form. I would expect one to have thick walls when printing this with plastic however.
What's in it?
It includes 3 key components
- Base which is screwed to your wall
- Plastic dowel(Please, replace this and forget about it, don't print it if you can)
- Headphone "rest" it is used to keep the headphones safe, is tooless to mount and cannot be removed unless lifted VERTICALLY UP(from the part closest to the wall) If the headphones are on it it will not slide off the dowel either.
How does it work?
This tooless system works by (see on last pic) making contact with the wall, it has leverage which will help the whole system support more weight, it supports heavier headphones in effect, protects your wall, and the curved area allows it to maintain a greater amount of surface area. The rest of the weight is brought back to the mouting part where 4 or 8 screws are use and attached to your wall.
Why this one over others?
VESA compatible(put it on monitor stands if you want)
Expansion(infinite till you run out of wall)
Works alone(if you have a wall)
Add supports with Wall brackets to your long pipe system
Beautiful and elegant design
EASY to print.
Who is this for?
With it's easy to mount design, expansion abilities, and being able to print it anywhere without support, it is safe to say that this is for anybody who needs a mount on their wall for virtually ANYTHING with this specific model including the headphone module and base.
Entry to competition:
This is an entry into the SilverStone wall-mounted headphone stand design competition in collaboration with Linus Tech Tips.
Please cast your vote for this entry by downloading it.
You can view Linus' video about the competition here:
To Prepare for it: Have a nice day :-)___________________________________________________________________(from readme)This model uses 1.5inch diameter Dowel and it is not necessary to print the dowel, if one is available. I had 3D printing in mind when creating this model and in the prototype phases, Please use a wooden Dowel of 1.5" diameter instead of steel pipe to hopefully keep the No support necessary Pre configured but available seperate 133 x 192 x 137 (lwh)mm
| 发表的日期 | 03/06/2015 |
| 让时间去下载 | 30 - 720 分钟 |
| 材料数量 | unknown |
| 尺寸大小 | 133mm x 192mm x 137mm |
| 复杂程度 | 非常容易 |
| 支持自定义 | YES |
