Montini Hercules Relief Set (Lego Compatible)
Montini Hercules Relief Set (Lego Compatible)
Published 2020-01-10T18:28:40+00:00
This votive relief to Hercules is comprised of individual Montini building blocks.
I made the Montini model and sliced the artwork to fit as a relief on a wall of bricks.
Original artwork scan: https://www.myminifactory.com/object/3d-print-votive-relief-95816
Montini building bricks were produced from 1961 to 1969 in the Netherlands. They were originally made from soft, pliable polypropylene. The diagonal fins bend slightly around the pips of the other block.
http://www.puppenhausmuseum.de/montini-bausteine.html
Please do not mix these with original Montini parts. PLA is much harder than the original bricks, and the layer ridges act like sand paper. You will wear out the original Montini bricks very quickly.
Before printing, check that the infill angle is across the diagonal fins. That will prevent sagging of the first layer of the top plate that has the pips.
Just like the vintage original Montini parts, these are compatible with classic Lego full height bricks.
These are optimized for a 0.4mm nozzle. They are friction fit parts, so tolerances are important.
Before printing, check that the infill angle is across the diagonal fins. That will prevent sagging of the first layer of the top plate that has the pips.
Some parts will need supports. The bricks themselves do not need supports, but the relief may need it.
发表的日期 | 10/01/2020 |