Montini Mask of Chaac (Lego Compatible)
Montini Mask of Chaac (Lego Compatible)
3D
Published 2020-02-10T10:00:14+00:00 • Remixed from Mask of Chaac, Montini building bricks Two Pip Set (Lego Compatible), Montini building bricks Female Plate Set (Lego Compatible), Montini building bricks Pip Strip Set (Lego Compatible), Montini building bricks One Pip Set (Lego Compatible)
This Montini brick is joined with a Mayan carving from the Yucatán Peninsula of Mexico.
Just like the vintage original Montini parts, this is compatible with classic Lego full height bricks.
Montini building bricks were produced from 1961 to 1969 in the Netherlands. They were originally made from soft, pliable polypropylene. The diagonal fins bend slightly around the pips of the other block.
puppenhausmuseum.de/montini-bausteine.html
Please do not mix these with original Montini parts. PLA is much harder than the original bricks, and the layer ridges act like sand paper. You will wear out the original Montini bricks very quickly.
I would love to see your make!
Original art scan:
www.myminifactory.com/object/3d-print-mask-of-chaac-64946
Rafts:No
Supports:Yes
Resolution: .15
Infill:25%
These are optimized for a 0.4mm nozzle. They are friction fit parts, so tolerances are important.
The bricks themselves do not need infill.
I set the Horizontal Shells Top to 7, and Bottom to 10 to allow for the relief to have infill, but the brick to be solid.
| 发表的日期 | 10/02/2020 |
