Moodlamp
Moodlamp
3D
Published 2020-04-21T19:19:14+00:00
This lamp is designed to be printed without support and easy to print.
This model is made for the Electromaker Kit Competition. Only stem and shade are included in the download. The rest of the parts can be downloaded from the Electromaker website.
electromaker.io/project/view/mood-lamp#
Print instructions
Stem
No supports
0 Top/Bottom thickness(layers) in your slicer of choice so the model will be hollow (or vase mode)
No infill
Wall thickness depending on the nozzle size.
Shade
Printed on the side so you don’t need supports
With top and bottom-layers
Infill to your liking remember the less you use the more light comes through. I didn’t use infill.
Print instructions
Stem
No supports
0 Top/Bottom thickness(layers) in your slicer of choice so the model will be hollow (or vase mode)
No infill
Wall thickness depending on the nozzle size.
Shade
Printed on the side so you don’t need supports
With top and bottom-layers
Infill to your liking remember the less you use the more light comes through. I didn’t use infill.
| 发表的日期 | 21/04/2020 |
| 支持自定义 | YES |