Network Equipment Wall Mount (1U)
Network Equipment Wall Mount (1U)
3D
Published 2017-03-20T11:50:30+00:00
Need to attach a rack-mountable piece of equipment to a wall? Here's a simple, elegant solution.
Originally designed to attach an old Dell 2724 to the wall of a networking closet, this should work for a large variety of networking appliances. The mount intended to work with devices that are about 45mm thick or 1U. One of the bottom corners required a cut-out for the power plug, so I provided both versions. (you may have to mirror the parts in your slicer)
I designed them to take a #8 counter-sink construction-screw, but drywall screws should work fine too.
Standard print settings should work .8mm perimeters, 5-15% infill, layer-height shouldn't matter that much. They seem really sturdy so far, but I'd only reccomend this for lightweight equipment.
| 发表的日期 | 20/03/2017 |
| 让时间去下载 | 180 - 220 分钟 |
| 材料数量 | 70 grams for a set |
| 尺寸大小 | 50x50x50 each |
| 打印工艺 | FDM |
| 复杂程度 | 中级 |
| 支持自定义 | YES |