Nintendo Switch Zelda inspired half case Screen Defender
Nintendo Switch Zelda inspired half case Screen Defender
3D
Published 2017-04-05T11:22:28+00:00
Here is another entry into the Nintendo switch accessory design competition.
No longer fear the threat of screen damage with this innovative screen defender.
After 2 weeks and many design revisions and many prints, I finally created a screen protector that allows the switch to be more portable than ever. Almost everyone I know fears for the screen to be scratched, so I decided to address that issue with a strong and durable case. Utilizing the Joycon connectors it slides effortlessly on. With the cover art options from a legend of Zelda inspired sketch or the Nintendo switch logo, the screen cover is not just functional but good looking.
Only adding 7mm to the thickness of the Switch, and 12mm to the width, the screen protector is very portable. (see the photos of the size comparison between a comparable hard case.)
Easily converted into play mode by repositioning the screen cover, and with integrated exhaust port provides the necessary airflow for continued operation.
The joy con connectors on the Nintendo switch cover are non-locking, and are omni-directional. If there is enough interest in this cover I will create the necessary modifications to make it so they click in.
No longer worry about putting the switch into a bag or purse with loose objects. I tested the switch in bags of nails, rocks, and more likely scenario, amiibos. The switch cover provides unparalleled screen protection and portability. (see photos)
(Do not try these tests at home)
update 4/24/2017
Upon request from MicBro, I made a new revision called "mrk. 15 zelda buffed" which adds 6mm to the thickness to avoid damage from being dropped upon its screen when in the playing mode orientation.
| 发表的日期 | 05/04/2017 |
| 让时间去下载 | - 360 分钟 |
| 材料数量 | 172 |
| 尺寸大小 | 185.5 x 107 x 21.5mm |
| 打印工艺 | FDM |
| 支持自定义 | YES |