OpenLOCK Dungeon Stone Low Curved Interfaces
OpenLOCK Dungeon Stone Low Curved Interfaces
3D
Published 2018-04-20T10:52:02+00:00
A really difficult problem that has plagued dungeon tiles is getting curved rooms (like say castle turrets) to line up well with the rest of your tiles. This set aims to fix that (at least for round rooms with a radius of 2 squares). It gives you 5 different floor options that line up against G walls that can be combined to have a floor coming out at 90 degree angles (of the squares) at pretty much any spot against a curved G wall. It also gives you 3 walls (and their mirrors) that can be added to have walls coming out at any 90 degree angle to the squares.
Finally, there's a significant issue for things like doors - the come out of the curved room at 45 degree angles. The new Gx Wall fixes that by giving you a 45 degree wall segment that lets you offset other walls (and doors) to 90 degree angles, as well as the new Gx door that lets you even get it to 22.5 degrees. Historically you could position a door/window/arrow slit/etc at 4 positions with 45 degree offsets to the floor squares. Now you can set them at 16 different angles.
There is also a full wall version of this.
For instructions on how to get started with OpenForge, take a look at our tutorials.
OpenForge is now a patron supported project. I use the resources that my patrons give me in order to get the resources to let me create more sophisticated tiles with a greater level of detail. Please, support me, and I’ll deliver an ongoing stream of awesome gaming terrain. You can find more about OpenForge and Masterwork Tools at our:
- Online catalog and backer site
- Website
- Forums (Mostly we use facebook now)
Per round room you want to be able to add a full set of options to, you will need to print:
Floors:
openlock versions will need an openforge base if you want magnets, otherwise you can print the triplex version
- 1 ExG floor
- 1 G floor
- 2 Gx floors
- 1 UxG floor
- 1 UxG2 floor
- 2 RxG floors
- 2 SxG floors
Walls:
openlock versions will need an openforge base if you want magnets, otherwise you can print the triplex version. AxG & QxG offer verions with pegs on top. All offer versions with or without sidelocks.
- 1 AxG & 1 AxG mirror wall
- 1 BAxG & 1 BAxG mirror wall
- 1 QxG & 1 QxG mirror wall
To be able to move doors to the full 16 angles instead of 4, you will need:
Low walls don't work well for showing things like doors and windows. I recommend that you print full height versions of those.
- 2 Gx walls
- 1 Gx door (from the full wall set)
- 1 narrow curved door (from the full wall set)
| 发表的日期 | 20/04/2018 |