PIR Sensor / Button for Plotclock / -Thermometer
PIR Sensor / Button for Plotclock / -Thermometer
3D
Published 2017-06-19T09:42:55+00:00
Update #1: Minor bug fix in the Calibration routine -> v1_1b
This are two enhancements for the plot thermometer / clock http://www.thingiverse.com/thing:371248
Such a plot thermometer / clock is a cool stuff but you can't use it for long time as the pen gets empty (or even drys out). This two enhancements makes that it plots only if it is really required:
PIR sensor: if someone is in the room
Button: If you press the button
One or the other can be attached to the plot thermometer/clock to the interface on the right side.
With the PIR sensor it plot as long it detects someone, with the button it prints once when the minute changed. As its also not good to let dry the ink on the board it cleans up the board one minute after nobody is in the room. If you don't attach whether button or PIR sensor it runs normal and writes time or temperature every minute
The PIR Sensor is a HC-SR501 you might find everwhere
The tactil switche is from SparkfunCOM-10302
- Solder pins 2.54x1 (www.conrad.de 409076)
- Solder sockets 2.54x1 (www.conrad.de 733779)
The stl's are made wit Thinker Cad
| 发表的日期 | 19/06/2017 |
| 打印工艺 | FDM |
| 复杂程度 | 中级 |