Pokemon Quest Ultraball Container
Pokemon Quest Ultraball Container
3D
Published 2018-06-21T14:33:04+00:00 • Remixed from Pokemon Quest Pokeball Container
This is a Pokemon Quest Ultraball that I design by remixing the regular Pokemon Quest Pokeball (https://www.myminifactory.com/object/3d-print-67197)! It can also be used as a storage container.
Designed with 0.4mm nozzle in mind. The walls are a multiple of 0.4. It is easy to print and does not require any support.
There are 5 pieces in total to print, and assembles easily.
You will require some glue to stick the white button to the black center piece. The center piece is indented for easy alignment of the button
Any tips are appreciated :)
This is designed for slicing with 0.4mm nozzle.
Print the following:
1x PQ_halve
1x PQ_center
1x PQ_button (needs to be rotated 90 degrees)
1x PQ_ultraball_H (needs to be rotated 180 degrees)
1x PQ_ultraball_t_halve (needs to be rotated 180 degrees)
| 发表的日期 | 21/06/2018 |
| 尺寸大小 | 50mm x 50mm |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |