Potentiometer Panels :: Polypanel Electronics
Potentiometer Panels :: Polypanel Electronics
3D
Published 2019-05-18T09:20:21+00:00 • Remixed from Polypanels // Square, Polypanels // *Snaps Only*
Potentiometer polypanels for one, two, or four (NEW!) 16 mm pots.
This set also includes three knobs, with 9 mm, 15 mm and 32 mm diameter, for potentiometers with knurled shafts.
Note that the quad panel is pretty cramped, and may extend into neighboring panels when fully populated. I recommend the 9 mm knobs for this panel.
Note that the knobs in the photos are printed with a flexible PLA, which gives a nice look and feel, but the knobs may slip at the end positions if you use that or similar materials. That's not necessarily a problem, depending on your application, but see https://www.myminifactory.com/object/3d-print-95360 for a solution to this.
The servo panels in one of the pictures are from the robot platform kit at https://www.myminifactory.com/object/3d-print-91515
For more on polypanels, see makeanything.design/polypanels.
| 发表的日期 | 18/05/2019 |
| 尺寸大小 | 50x50 mm |
| 支持自定义 | YES |