Raspberry Pi 4 Ice Tower case
Raspberry Pi 4 Ice Tower case
3D
Published 2019-12-16T20:14:05+00:00
Case for the Raspberry Pi 4 (and possible 3) with the excellent Ice Tower cooling system. Under full CPU load it shaves off about 20°C, preventing the RPI from overheating.
You can buy it here: http://s.click.aliexpress.com/e/p4SEBCXQ
This version should also work: http://s.click.aliexpress.com/e/dgdKBUys
It's a remix from here: https://www.thingiverse.com/thing:3712499 . You can use any top cover from there.
I ended up not using the bottom screws because the RPI sits in there tight enough. The acrylic window in the front is the base plate that comes with the Ice Tower.
I used supports for the large window in the front. If your printer is great at bridging you might get away without it.
| 发表的日期 | 16/12/2019 |
| 材料数量 | ~55g |
| 尺寸大小 | 92x62x84mm |