Raspberry Pi enclosure for storj.io cloud (single and double 2.5" hdd/sdd)
Raspberry Pi enclosure for storj.io cloud (single and double 2.5" hdd/sdd)
Published 2017-07-10T17:01:24+00:00
This is an enclosure for my storj.io node. Storj.io is a decentralized cloud based on blockchain technology.
Depending on the number of harddisks, or solid state disks as well, the enclosure provides space for a Raspberry PI 1/2/3 and one or two 2.5" harddisks.
For a single harddisk enclosure following files are needed: single hdd case bottom, single hdd case holder, hdd case top
For a double harddisk enclosre use: double hdd case bottom, double hdd case holder, hdd case top
Update 17-07-2017:
-) cutouts for Raspberry PI have been modified
-) shell is now slightly thinker
-) offset from the edge of the top to the edge of the lip was not correct and so it was slightly to lose.
All parts of the enclosure were printed in PLA with 0.2 microns layer height.
发表的日期 | 10/07/2017 |
让时间去下载 | 240 - 420 分钟 |
尺寸大小 | 135mm * 137mm * 25 or 35 mm (depending on single or double) |
打印工艺 | FDM |
支持自定义 | YES |