RC Car/Truck LED Lighting Power Distribution Box
RC Car/Truck LED Lighting Power Distribution Box
3D
Published 2019-05-02T11:38:05+00:00
This is a power distribution box designed to power all of the different LED lights on a scale RC vehicle.
The main function of the print is that once assembled (as shown) you simply plug the standard JST-XH balance connector from your battery into the top port of the distribution box and it powers your lighting without excessive wire splices and mess. A secondary benefit to the print is that with the Traxxas TRX-4, when mounted in the battery tray, it will function as a battery spacer thus reducing the amount of battery movement allowed which can help with tuning.
The print is printed without any supports and is designed to be hollow so that the solder joint that you make between the JST-XH socket and whatever power output leads/connectors you choose are enclosed in the box and look neat and tidy.
Printing is fairly straight-forwad as the part is designed to print hollow without supports. Orient the part such that the rectangle hole is facing down on the build plate and you should be good to go.
Layer heights shouldn't make too much difference, but anywhere between 0.1mm and 0.2mm will be fine.
| 发表的日期 | 02/05/2019 |
| 支持自定义 | YES |
