Rooster - Celebrating Chinese New Year 2017
Rooster - Celebrating Chinese New Year 2017
3D
Published 2017-03-21T16:15:10+00:00
This is a static(non-moving) print of a Rooster to celebrate the Chinese New Year of 2017. The design will stand up on it's own two legs for decorative purposes.
Two versions (.stl's) have been provided, a standard / basic version and a reduced size key fob version.
The standard / basic version is just the simple Rooster and measures approx. 57.5mm x 82.5mm x 9mm. At this scale the designed in decorative detail should be clean and clear when printed on a well set up machine with a good slicing app (Refer images). Scaling down will reduce the amount of visible detail in the print. Scaling up should be no problem.
The key fob version is approx. 30% smaller (45mm x 55mm x 8mm) than the standard / basic version to make it a practical size for use on a key ring and so it will still fit in a pocket comfortably. However, this reduces the amount of visible detail in the print. You can scale up X / Y uniformly (not Z) if you want a bigger Rooster.
Print in your choice of colour and scale up if required. Scaling down is not recommended. You can make your Rooster two colors if you want by pausing the print at 1.0 - 1.5mm in and 1.0 - 1.5mm before the end. Just watch the print as it progresses and the formation of the detail makes it easy to determine suitable times to change colors.
Quick, easy and fun little prints for yourself, as a decoration or as a gift.
Please refer to the print settings and images for additional information.... and post images of your Rooster prints for others to see.
Note: If you like this take a look at the rest of my fun and practical designs.
Easy prints for a well sliced file on a precise / accurate machine. There is a lot of fine detail in this print so a good print quality test.
Easy print...
This is a static model so no post-print processing required other than removal of raft if used.
| 发表的日期 | 21/03/2017 |
| 打印工艺 | FDM |