Shinra PHS Cosplay Phone Accessory– Final Fantasy VII: Remake
Shinra PHS Cosplay Phone Accessory– Final Fantasy VII: Remake
3D
Published 2021-03-01T11:05:36+00:00
Make any cell phone into a Shinra Issued PHS! The perfect look for any Board Director, Turk, or S.O.L.D.I.E.R.
Disclaimer: These PHS accessories are just for visual style and DO NOT protect a phone from any drops, bumps, screen breakage, monster attacks, plate drops, helicopter crashes, deepground incursions, ninja ambushes, or forays into the Northern Crater.
This model is designed for a Samsung S8 cell phone (68.1 x 148.9 x 8.0 mm) with built in tolerances, but you can modify the model in any slicer by changing the X, Y, and Z dimensions to fit any phone. For example if you need to make this fit an iPhone12 (71.5 x 146.7 x 7.4mm), unlink the scaling in the slicer, and change the X to 105%, Y to 98%, and Z to 93%. If the tolerance is just slightly too loose, you can use a small bubble of tape to hold the accessory in place.
For easier printing on a FDM printer, slice the model in ½ and lay the flat sides onto the bed. Be sure to add a brim and use supports as the surface area attached to the plate is pretty small. Glue them together.
| 发表的日期 | 01/03/2021 |