Simple Bear (Totemic)
Simple Bear (Totemic)
3D
Published 2018-07-12T15:00:19+00:00
A simple bear made of basic shapes. I tried to make it bear-like without much actual detail, in a kind of totem style. It is a nice little animal figurine.
5.2 cm x 8.8 cm x 6.2 cm if printed at original size. It can be scaled up to whatever size or it can be scaled down a little. It does not have supports, but it needs them. I used the basic Prusa Slic3r generated supports, and it worked great. It can be printed at standard .2 mm resolution, and with light infill (15% is my usual).
This object was made in Tinkercad. https://www.tinkercad.com/things/65osXEhDbiH
5.2 cm x 8.8 cm x 6.2 cm if printed at original size. It can be scaled up to whatever size or it can be scaled down a little.
It does not have supports, but it needs them. I used the basic Prusa Slic3r generated supports, and it worked great.
It can be printed at standard .2 mm resolution, and with light infill (15% is my usual).
| 发表的日期 | 12/07/2018 |
| 让时间去下载 | 360 - 分钟 |
| 尺寸大小 | 52mm x 88mm x 62mm |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
Beautiful