Simple Elephant (Totemic)
Simple Elephant (Totemic)
3D
Published 2018-07-23T14:34:04+00:00
A simple elephant made out of basic shapes, in a kind of totemic style. It is slightly larger than my other totem animals at 61mm x 157mm x 95mm. Because it is an elephant. Due to the size of the tusks, tail, and ears, I would not recommend scaling the model down to print. However, it might be fine to make it a little smaller.
The object needs supports to print. I printed with the Prusa 3D Slic3r's generated supports and a 6mm brim, and that worked great. At 15% infill and .2mm resolution, it printed in about 8.5 hours.
This object was made in Tinkercad. https://www.tinkercad.com/things/2avgfsuCGoo
The object needs supports to print. I printed with the Prusa 3D Slic3r's generated supports and a 6mm brim, and that worked great. At 15% infill and .2mm resolution, it printed in about 8.5 hours. 61mm x 157mm x 95mm. I would not recommend scaling it down, but it's up to you if you want to try it.
| 发表的日期 | 23/07/2018 |
| 让时间去下载 | 510 - 分钟 |
| 尺寸大小 | 61mm x 157mm x 95mm |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
