Simple Sea Turtle (Totemic)
Simple Sea Turtle (Totemic)
3D
Published 2018-07-23T14:33:36+00:00
A simple sea turtle made from basic shapes. It is done in a kind of totemic style. As it is, it is 53mm x 53mm x 22mm. I would not recommend scaling it down. It's already pretty small. It can definitely be scaled up, though. It printed in about 1.5 hours at .2mm resolution and 15% infill.
It needs supports. I used the Prusa 3D Slic3r generated supports and a 6mm brim, and that worked great.
This object was made in Tinkercad. https://www.tinkercad.com/things/i4aNYZIj1Bw
As it is, it is 53mm x 53mm x 22mm. I would not recommend scaling it down. It's already pretty small. It can definitely be scaled up, though. It printed in about 1.5 hours at .2mm resolution and 15% infill. It needs supports. I used the Prusa 3D Slic3r generated supports and a 6mm brim, and that worked great.
| 发表的日期 | 23/07/2018 |
| 让时间去下载 | 90 - 分钟 |
| 尺寸大小 | 53mm x 53mm x 22mm |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |