Single 18650 Mechanical Squonk Mod Frame
Single 18650 Mechanical Squonk Mod Frame
3D
Published 2018-07-06T10:24:45+00:00
Make your own mechanical squonk mod
I used a 3D printed frame and made some front and back panels made of wood, but you can also 3D print them if you want to (I attached the .st files for them as well). If you want to make them out of wood, you can get the .dxf file from my website and cut them out of 3mm (1/8") thick wood or even acrylic.
If you prefer printing them, you could print them in a different colour to achieve a contrast to the frame. For example a black frame and orange panels.
For more information about how to build this mod, you can check out my video on youtube on how I made this mod
Or visit my website for free build plans, including detailed parts list and some more information: www.modern-crafts.net
Also feel free to check out all the other mods I made on instagram @modern_crafts
- 0.15mm layer height
- 4 perimeters
- 30% infill
- Print in PETG/ABS (or other material which can handle higher temperatures)
| 发表的日期 | 06/07/2018 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |