Slim TPU Wallet
Slim TPU Wallet
3D
Published 2020-04-24T10:05:16+00:00
If you are into printing flexible filaments you might like this simple and durable one piece wallet design. It fits around 5 cards, 5 notes and a few coins in its minimal form factor.
It takes advantage of the flexible TPU material with a side squeeze mechanism to create a larger opening to access your stuff [see photo] and when in your pocket the cards and cash stay firmly in place.
We printed this wallet with Black TPU 95A shore hardness [Ultimaker]
To print this design we used an Ultimaker 2+ 3D printer and the print in the photos is printed with a 0.4 mm nozzle. [Because of the thin wall sections we wouldn't recommend using a larger nozzle diameter]
We would love to see your prints!
Follow us!
F: facebook.com/3dppa
I: @3dprintproject.athens
As we only have Ultimaker 2+ 3d printers with bowden systems printing flexible materials can be difficult, Therefore we used Ultimaker brand TPU and curas slicer settings for this material. However if you have a direct drive system [Prussa + many others] you may be able to push our conservative settings more.
Resolution: 0.1
Infill: 100%
Brim: Yes (At least 8mm)
Raft: No
Speed: 40mm/s
Post processing: Remove brim
Notes: Printing flexible filament involves more trial and error that conventional printing be prepared to dial in settings!
| 发表的日期 | 24/04/2020 |
| 让时间去下载 | 5 - 分钟 |
| 材料数量 | 16g |
| 尺寸大小 | 59mm x 94mm 11mm |
| 支持自定义 | YES |
