Smart Assistant Flush Mount Light Switch Box Assembly (Echo Dot 2nd Gen)
Smart Assistant Flush Mount Light Switch Box Assembly (Echo Dot 2nd Gen)
3D
Published 2019-02-24T09:15:28+00:00
Upgrade your Smart assistant with this modern in the wall mount. If you have little table space, dont enjoy looking at the wires or device sitting on the table, or you just want a new way to upgrade your house now you can with this design. I have designed in all in one solution to mount your Echo Dot 2nd Gen in the wall below or above light switches. You cannot buy any of these 3d printed parts in stores. From the remodelers box and locking fins to the light switch cover this solution puts your echo dot in the wall too add a modern and futurist look to your home.
Purchased Materials needed
(x1) Remodelers box, for the screws on the locking fins
(x1) 3 position light switch cover, for the white painted screws. Not required but looks more finished.
(x2) Light switch (only if not reusing old switches)
(x1) AC outlet (Nema 1-15r type), for echo dot charger inside box similar to this https://www.digikey.com/product-detail/en/qualtek/738W-CX2-01/Q281-ND/299908
(x1) Echo Dot 2nd Gen
Required Printed Materials
(x1) Echo dot cover plate
(x1) Electrical light switch box 2 gang
(x2) Fin
(x1) Cutout tool
As with any home parts near electricity it is recommended to us FR UL rated filament (not required but recommended)
If you like this design please share, comment, and like.
0.2mm - 0.4mm layer height
60mm/sec
50% infill
| 发表的日期 | 24/02/2019 |
| 让时间去下载 | 480 - 481 分钟 |
| 尺寸大小 | 215mmx100mmx75mm |