Spoolholder
1,813
views
47
downloads
0 comments
Loading comments... 
Spoolholder
3D
Published 2018-08-07T10:20:07+00:00
1
0
Add to Collection
Description
This Spoolholder was created as part of the 3d Printing Nerd design challenge for a spoolholder that can easily be mounted to his filamentshelfes. However when you have a 3/4" (18-19mm) deep board, this spoolholder might be for you. I submited another design that prints faster but the spool is oriented in a 90° angle towards the spools left on the shelf, but all the other features of this design still apply.
Features:
- Prints in one Piece, without supports
- Fits 30cm (11,8 inch) spools
- Loadtested up to 6 kg (13,23 lbs) (using the provided printig details)
- can be printed on a 20cm x 20cm (7,9" x 7,9") printbed
- no additional hardware needed
NOTE: Check your print for underextrusion since this can significantly decrease the stability, especially when occurring on the small back part.
Printing Details
Material: PLA
Temperature: 210°C
Infill: 20% Cubic
Top- and Bottomlayers: 4
Shells: 5
Technical Information
| 发表的日期 | 07/08/2018 |
| 让时间去下载 | 6 - 15 分钟 |
| 材料数量 | 85g |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
| 支持自定义 | YES |
More Information
Object Parts
