Spray Can Handle and Trigger
- 家居产品>
- DIY工具 |
- 入门级 |
- 工具和零件>
- DIY / Gardening Tools
Spray Can Handle and Trigger
Published 2021-09-08T16:14:42+00:00
I liked this handle (first seen on Thingiverse), but the trigger is too long. I decided to make a shorter version to use only 1 or 2 fingers to pull it.
This way it allows a better and more stable grip on the handle.
To increase the durability further, the trigger is to be printed horizontally, and attaches to the handle with a M5x15mm bolt that acts as a pivot and a M5 nut.
There is a version of the handle that allows to use an M4 bolt and nut to compress the collar, no zip ties needed.
OBS: This is a remixed version of a model published on Thingiverse. I'd give the credits to the creator, but I couldn't find this model publishe here at MyMiniFactory.
=====
If you'd like to support me you can post a make, comment and/or pay me a coffee at PayPal
Print settings: 0.2 resolution, 3 shells, 15% infill, supports on (touching build plate, only for handle) and i suggest, if your slicer allows it, to print the collar solid, to make it tougher.
发表的日期 | 08/09/2021 |