Springy Shape
Support Free
Featured
4,277
views
134
downloads
6
collections
0 comments
Loading comments...
Springy Shape
3D
Published 2015-09-18T10:47:11+00:00
22
0
Add to Collection
Description
Single piece print that folds up to become a bouncy ball.
additional materials:
-hot glue gun
1 - print. I printed these with my default settings: 0.1mm layer height and .8mm shell thickness, no support or raft. I used PLA for the prints shown here.
2 - carefully remove from build plate. work inward around perimeter.
3 - put a dot of hotglue on each corner, fold up and hold.
4 - continue until you have two hemispheres glued up.
5 - put glue around seam and close up.
note: to get just the protrusions a different color, I switched filament at exactly 2.05mm with the use of a software plugin
Printing Details
Print at 0.2 mm layer height, with 10% infill.
Technical Information
发表的日期 | 18/09/2015 |
让时间去下载 | 108 - 118 分钟 |
材料数量 | 20 g |
尺寸大小 | 163 x 80 x 21 |
打印工艺 | FDM |
复杂程度 | 中级 |
支持自定义 | YES |
More Information
Object Parts