Please enter the code below
Here is a simple storage box with hinged lid for screws, nuts, washers or any small objects.
The dimensions are 100 mm x 80 mm with a height of 47 mm with the lid. You can split the box in 2 compartments by using the separator.
This box can me mounted on a wall with the additional part and 2 x M4 screws.
Printed in PLA in 0.2 mm with 100 % infill.
- All parts printed oriented as the default in the STL files- Need support for all parts except for the separator - Brim of 4 mm for all parts except for the box