KS1SOS02 - Rogue Brackmurk
$5.00 KS1SOS02 - Rogue Brackmurk
3D
Published 2021-01-07T12:20:32+00:00
Swamp of Sorrows - Rogue Brackmurk contains 42 3D-printable STL models for brackish water encounters. Rogue Brackmurk is the second of three swamp terrain sets in the Swamp of Sorrows Kickstarter. Rogue Brackmurk and Lily Wetlands were the prototype sets. If you are just printing one swamp, don't buy this set. Instead, we recommend Scarlettfens. It is the BEST of three, with the most development and largest number of available tiles. Should you be unable to resist the urge of purchase, you'll find plenty of great brackish water swamp tiles. Inside you'll find Walls, Corners, Pillars, and Water tiles that allow for a distinctly different swamp from the Lily Wetlands, while not nearly as wild and overgrown as the recommended Scarlettfens.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm)
Raft/Brim/Supports: Brim helpful on small items
| 发表的日期 | 07/01/2021 |
| Price | $5.00 |
| 支持自定义 | YES |