Terminator Buddha
Terminator Buddha
3D
Published 2018-10-10T17:58:01+00:00
Couldn't find a Terminator Pop Buddha statue anywhere so I combined models to make my own.
I thought meditating on a pile of human skulls was more appropriate than the original base.
I combined Geoffro's T-800 head and Buddha statue from Thingiverse.
https://www.thingiverse.com/thing:290357
https://www.thingiverse.com/thing:329057
I don't have a 3d printer yet, so I would appreciate any feedback from people who give it a shot. I've cleared any problems Meshmixer and loaded it up into Cura to look at the layers for anything obvious.
I used multiple skull models for the pile including:
Female skull injured by sword
Provinciaal depot voor archeologie Noord-Holland
https://sketchfab.com/models/be61ad2567024febbc1b9cc566a1d372#
Cranium
UNCG Imaging Lab
https://sketchfab.com/models/c39855833ff74943a2847972c9ff8700
kobanian skull (800 BC)
kantemrati
https://sketchfab.com/models/1d32fa630aeb46988f75c397df3cc429
Modern Human Skull
BrightonMuseums
https://sketchfab.com/models/f55ae4d36e52457fa1401edd57d4bb4f#
There are a few more skulls I still need to add attributions for.
| 发表的日期 | 10/10/2018 |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
Some parts are very thin and very easy to break, The printing effect is very bad. Some of the thickness is too thin（please see pics uploaded）, If FDM，it is good that bigger than the conventional nozzle diameter 0.4mm。Usually the suggestion is bigger than 0.8mm。