The High Five 3D Printing Nerd ULTIMATE Spool Holder
The High Five 3D Printing Nerd ULTIMATE Spool Holder
Published 2018-08-10T16:24:36+00:00
Is your filament up on a wall. Don't want to take it down and put it on your printer? What if you don't want to disturb the filament spools around it?
In comes the Ulitmate Spool holder, designed exclusively for THE 3D Printing Nerd! He has a wall full of filament and a table full of printers and he needs a way to connect them.
This is it! Hang it off those 1x2's. Slide that filament over the #HighFive bar, slap the printed hand at the end just for good measure, and then place the custom made 3D Printing Nerd engraved stopper to keep that roll from falling off (Also useful to remind you and your viewers of who you are, look, your youtube channel is right there!).
Now you're ready to print in style!
#HighFive!
No Supports. Prints easily. Printed on a Monoprice Maker Select v2.
Print a qty of 1 of each file for a full assembly.
发表的日期 | 10/08/2018 |
让时间去下载 | 240 - 分钟 |
尺寸大小 | 6"x2.25"x1.25" |
打印工艺 | FDM |
复杂程度 | 容易 |
支持自定义 | YES |