Playing with Sculptris i made this!!
I call it 'The Roadrunner', it's just a guy and his monocycle.
Figure in pictures is printed at 2x scale. Also i made some test at 75% and it can print well.
I used my favourite combo of Fillamentum PLA (Vertigo grey + Iceland Blue + Gold Happens) for the figure in photos.
See Printing details section for more info.
Hope you like it.
Main figure is printed with 0% infill, 3 walls/perimeters, 3 bottoms and 4 top layers.
Supports required, i reoriented the STL as i printed but feel free to find a better position or orientation in your slicer.
You may need sanding to put the 'flames' into figure so i recommend using a -0.2 horizontal expansion and use some glue if aome parts are loose