Tourbillon Mechanica Escapement Mechanism
Tourbillon Mechanica Escapement Mechanism
3D
Published 2020-04-23T08:10:15+00:00
The Escapement Mechanism of the Tourbillon Mechanica:
Video Link: https://www.youtube.com/watch?v=4DHofJbkiFo&t=14s (kindly note that the part shown in the video link is an SLA printed model.
Assembly Guide: Link
Links to the hardwares that i used:
1.5mm and 2.0mm pins (I used ejector pin shafts that is cut down to length using a dremel with diamond disc cutter)
Dremel Diamond Disc Cutter Link
PLA
Highly recommend 0.3mm nozzle although 0.4mm could work if you're using a better quality printer.
Print the gears with low speeds, i used 15mm/s with 0.12mm layer height
Gear shaft diameter is designed to be slightly smaller so use a 1.5mm drill bit or any suitable tool to remove some materials and achieve smooth rotation.
Other Hardware:
1.5mm pins:
19mm - 4X
11mm - 1X
| 发表的日期 | 23/04/2020 |
| 材料数量 | approx 50 grams |
| 尺寸大小 | 90mm x 70m x 20mm |
| 支持自定义 | YES |