train track switch
printed with a temp of 230 and bed temp 62
print speed 60mm/s
filament: pla from by ctrl design
layer height 0,2mm
its designed to fit on the lego train track.
look at the files witch ones you need. there is a different in left and right.
print the files and then put it all together.
start with the switch slider put it in for 50% then you can hook on the switch part on the slider and slide it in place. now you can turn the model and put in the switch part connector. warning: when you put in the switch part connector it's hard to get it out again.
now you can place the switch handle by clicking it in to place
enjoy your train track