Green Future
Green Future
Published 2017-07-12T18:13:49+00:00
This is my design for TinkerCAD and MyMinifactory challenge!
I called it Green Future because the forms of the project remind me of the futuristic cities, suspended in the air and filled with plants to generate oxygen.
All 3 models that you find here are very easy to print! Arms (Upper_arm.stl, secondary_arm.stl )that keep vases in place are prety huge prints, but there is no support needed! Vase.stl is designed to be printed in vase mode to have less print time and less plastic waste! For my version of the project you'll need 3 vase.stl prints, 1 Upper_arm.stl and 2 secondary_arm.stl
This object was made in Tinkercad. https://www.tinkercad.com/things/17R63AHzGVu
Arm's settings:
0.35 mm layer height;
3 perimeters;
4 top solid layers;
4 bottom solid layers;
5% infill;
5 mm brim;
Vase settings:
0.35 layer height;
Vase mode;
3 bottom layers;
5 mm brim;
Dimensions are related to Upper_arm ( bigest one )
发表的日期 | 12/07/2017 |
让时间去下载 | 1300 - 1500 分钟 |
材料数量 | 350 gr |
尺寸大小 | 180mm x 170mm x 200mm |
打印工艺 | FDM |
复杂程度 | 中级 |
支持自定义 | YES |