Water purifier for 250ml can
Water purifier for 250ml can
Published 2018-02-21T09:53:05+00:00
Around 300 million people in the world do not have access to clean drinking water with simple 3d printed parts and a 250ml that could change this design allows for a water filter to be made inside the can by layering gravel, sand and charcoal and allowing them to filter out impurities this desing has threaded end that can be glued tothe can the allow the threaded caps to be removed for cleaning of the filter or to be re-used with another filter system the caps can also thread onto a standard water bottle on both ends to make filtering easier and can be left upright to do its thing this is prortable and optimized for 3d printing you can run your water through it as many times as you want then boil the filtered water to ensure the water is clean and bacteria free 3d printed parts may not be the best option for consumables but in a pinch it can make the difference between life and death
Print 0.3 mm with 15% fill
发表的日期 | 21/02/2018 |
让时间去下载 | 120 - 180 分钟 |
材料数量 | 46g |
尺寸大小 | 68.58 mm x 69 mm x 41 mm |
打印工艺 | FDM |
复杂程度 | 容易 |